Ip Isis Level-Capability - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

IS-IS Commands

ip isis level-capability

Configures the router level of the IS-IS protocol globally.
ip isis level-capability {level-1 | level-2 | level-1/2}
Syntax Definitions
level-1
level-2
level-1/2
Defaults
parameter
level-1 | level-2 | level-1/2
Platforms Supported
OmniSwitch 6850, 6850E, 9000E
Usage Guidelines
•
Changing the level capability restarts the IS-IS protocol.
•
You can also configure the level capability at per interface level.
Examples
-> ip isis level-capability level-1
-> ip isis level-capability level-2
Release History
Release 6.2.1; command was introduced.
Related Commands
ip isis interface level-capability
show ip isis status
MIB Objects
isisSysTable
isisSysType
OmniSwitch CLI Reference Guide
Specifies that the router can operate at Level-1 only.
Specifies that the router can operate at Level-2 only.
Specifies that the router can operate at both Level-1 and Level-2.
default
level-1/2
Configures the IS-IS level on the specified interface.
Displays the IS-IS status.
June 2012 page 24-7