Ip Slb Probe Send - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

ip slb probe send

Configures an ASCII string that is sent to a server to invoke a server response and verify the health of the
server.
ip slb probe probe_name {tcp | udp} send send_string
Syntax Definitions
probe_name
tcp
udp
send_string
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 9000E
Usage Guidelines
N/A
Examples
-> ip slb probe web_server tcp send test
Release History
Release 6.1; command was introduced.
Release 6.1.3; http and https parameters removed.
Related Commands
ip slb probe
show ip slb probes
MIB Objects
slbProbeTable
slbProbeName
slbProbeMethod
slbProbeSend
page 26-30
Specifies the name of the Server Load Balancing (SLB) probe.
Specifies a TCP probe.
Specifies a UDP probe.
Specifies the ASCII string sent to a server to invoke a response.
Configures and deletes SLB probes.
Displays the configuration of SLB probes.
Server Load Balancing Commands
OmniSwitch CLI Reference Guide June 2012