Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual page 2205

QoS Commands
-> show qos port 1/1
Slot/
Port Active Trust P/DSCP Classification Deflt Total Physical Ingress Egress Map/Mark Type
-----+-----+-----+------+--------------+-----+-----+--------+-------+------+--------+--------
1/1 Yes No
output definitions
Slot/Port
Active
Trust
Default P
Default DSCP
Default Classification
Default Queues
Total Queues
Physical Bandwidth
Ingress
Egress
DEI Map
DEI Mark
Type
Release History
Release 6.1; command was introduced.
Release 6.4.3; DEI Map and Mark fields added.
Related Commands
qos port
MIB Objects
alaQoSPortTable
alaQoSPortSlot
alaQoSPortPort
alaQoSPortEnabled
alaQoSPortDefault8021p
alaQoSPortDefaultDSCP
alaQoSPortDefaultQueues
alaQoSPortMaximumReservedBandwidth
alaQoSPortMaximumDefaultBandwidth
alaQoSPortDefaultClassification
alaQoSClassify
alaQoSClassifySourceInterfaceType
OmniSwitch CLI Reference Guide
Default Default
0/ 0 DSCP
The slot and physical port number.
Whether or not the port is sending/receiving QoS traffic.
Whether the port is trusted or not trusted.
The default 802.1p setting for the port.
The default ToS/DSCP setting for the port.
The default classification setting for the port (802.1p or DSCP).
The number of default queues.
The total number of queues.
The amount of physical bandwidth available on the port.
The amount of ingress bandwidth for the port.
The amount of egress bandwidth for the port.
Whether or not the port maps the DEI bit for yellow (non-conforming)
ingress packets.
Whether or not the port sets the DEI bit for yellow (non-conforming)
egress packets.
The interface type, ethernet or wan.
Configures a physical port for QoS.
June 2012
Queues Bandwidth
8 0 100M
DEI
- - No /Yes ethernet
page 32-67