Ip Bgp Policy Route-Map Med-Mode - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

BGP Commands

ip bgp policy route-map med-mode

Configures the action to be taken when setting the Multi-Exit Discriminator (MED) attribute for a match-
ing route.
ip bgp policy route-map name sequence_number med-mode {none | inc | dec | rep}
Syntax Definitions
name
sequence_number
none
inc
dec
rep
Defaults
parameter
none | inc | dec | rep
Platforms Supported
OmniSwitch 6850, 6855, 6850E, 9000E
Usage Guidelines
This command is used in conjunction with
the combined usage. In the second example, the MED value is incremented for a matching route by 5.
Examples
-> ip bgp policy route-map routemap1 1 med-mode inc
-> ip bgp policy route-map routemap1 1 med 5 med-mode inc
Release History
Release 6.1; command was introduced.
OmniSwitch CLI Reference Guide
The route map name.
The route map sequence number. The valid range is 1–255.
Do not set the MED.
Increment the MED in the matching route by the value specified in the
ip bgp policy route-map med
is found in the matching route.
Decrement the MED in the matching route by the value specified in the
ip bgp policy route-map med
is found in the matching route.
Replace the MED in the matching route by the value specified in the
bgp policy route-map med
matching route.
default
none
ip bgp policy route-map
June 2012
command. No action is taken if no MED
command. No action is taken if no MED
command even if no MED is found in the
med. The first example below shows
ip
page 25-141