Show Ipv6 Bgp Neighbors Timers - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

BGP Commands

show ipv6 bgp neighbors timers

Displays the timers for configured IPv6 BGP peers.
show ipv6 bgp neighbors timers [ipv6_address]
Syntax Definitions
ipv6_address
Defaults
By default, the timer values for all the IPv6 BGP peers will be displayed.
Platforms Supported
OmniSwitch 6850, 6855, 6850E, 9000E
Usage Guidelines
Use the ipv6_address parameter to display the timer value for a specified IPv6 BGP peer.
Examples
-> show ipv6 bgp neighbors timers
Legends: Nbr
As
RtAdv
Kalive
Ka(C)
Nbr address
----------------------------------+-----+-----+-------+-----+-----+------+-----
2001:100:3:4::1
output definitions
Nbr address
As
Hold
Hold (C)
RtAdv
Retry
OmniSwitch CLI Reference Guide
The 128-bit IPv6 address.
= Neighbor
= Autonomous System
= Route Advertisement
= Keep Alive (actual)
= Configured Keep Alive
As
30
The IPv6 address for this BGP peer. Assign this address using the
ipv6 bgp neighbor
The autonomous system to which this peer belongs. A peer's AS num-
ber is assigned using the
The actual negotiated hold time value.
The hold time value. This value is configured using the
neighbor timers
The route advertisement interval, in seconds, for updates between
external BGP peers.
The interval, in seconds, between retries by this peer to set up a connec-
tion via TCP with another peer. This value is configured using the
ipv6 bgp neighbor timers
June 2012
Hold Hold(C) RtAdv Retry Kalive Ka(C)
90 90 30
command.
ipv6 bgp neighbor remote-as
command.
command.
120 30 30
command.
ipv6 bgp
page 25-245