Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual page 2093

PIM Commands
Secondary Addresses:
3000::11
vlan-40
Neighbor IPv6 Address
Uptime
Expires
Lan Prune Delay Present
Propagation Delay
Override Interval
TBit Field
Gen ID Present
Gen ID Value
BiDir Capable
DR Priority Present
DR Priority
State Refresh Capable
Secondary Addresses:
4000::11
If a specific interface name is specified in the command line, detailed information corresponding to all
neighbors on the specified interface only displays:
-> show IPv6 pim neighbor vlan-30
vlan-30
Neighbor IPv6 Address
Uptime
Expires
Lan Prune Delay Present
Propagation Delay
Override Interval
TBit Field
Gen ID Present
Gen ID Value
BiDir Capable
DR Priority Present
DR Priority
State Refresh Capable
Secondary Addresses:
3000::11
output definitions
Neighbor IPv6 Address
Interface Name
Uptime
Expires
LAN Prune Delay present
Propagation Delay
OmniSwitch CLI Reference Guide
= fe80::2d0:95ff:feac:a537,
= 03h:57m:03s,
= 00h:01m:20s,
= True,
= 500,
= 2500,
= True,
= True,
= 0x7720c123,
= False,
= True,
= 1,
= True,
= fe80::2d0:95ff:feac:a537,
= 02h:57m:09s,
= 00h:01m:40s,
= True,
= 500,
= 2500,
= True,
= True,
= 0x7720c123,
= False,
= True,
= 1,
= True,
The IPv6 address of the active PIM neighbor.
The name of the IPv6 PIM interface that is used to reach the neighbor.
The amount of time since this PIM neighbor last became a neighbor of
the local router, displayed in hours, minutes, and seconds.
The minimum amount of time remaining before the PIM neighbor will
be aged out, displayed in hours, minutes, and seconds.
Specifies whether this neighbor is using the LAN Prune Delay option.
Options include true or false.
The value of the propagation-delay field of the LAN prune-delay
option received from this neighbor. A value of 0 indicates that no LAN
prune-delay option was received from this neighbor.
June 2012 page 30-105