Vlan Ipmvlan Address - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

vlan ipmvlan address

Assigns an IPv4 address, IPv6 address, or a range of addresses to an existing IPMVLAN.
vlan ipmvlan ipmvlan-id address {ip_address [{/prefixlen | mask mask}] | ipv6_address | ipaddress1-
ipaddress2 | ipv6address1-ipv6address2}
no vlan ipmvlan ipmvlan-id address {ip_address [{/prefixlen | mask mask}] | ipv6_address | ipaddress1-
ipaddress2 | ipv6address1-ipv6address2}
Syntax Definitions
ipmvlan-id
ip_address
/prefixlen
mask
ipv6_address
ipaddress1-ipaddress2
ipv6address1-ipv6address2
Defaults
parameter
prefixlen
mask
Platforms Supported
OmniSwitch 6400, 6850, 6855, 6850E, 9000E
Usage Guidelines
•
Use the no form of this command to disassociate the already assigned IPv4 or IPv6 address from the
IPMVLAN.
•
Use optional parameters mask or prefixlen with this command to assign subnet mask to IPv4 Multicast
Group Address.
•
IPMVLAN overlapping is allowed. The same address can be assigned to different
IPMVLANs as long as the IPMVLANs do not share a common receiver port. (Not supported on
OS9000E)
•
If you assign a range of addresses containing duplicate addresses already assigned to the IPMVLAN,
an error message will be displayed and no addresses will be added from that range.
page 28-6
Specifies the IP Multicast VLAN number to which the IP address will
be assigned. The valid range is 2–4094.
Specifies a 32-bit IP Multicast address that will be assigned to the
IPMVLAN.
Specifies the Prefix Length of mask.
Specifies the IPv4 address mask.
Specifies a 128-bit IPv6 Multicast address that will be assigned to the
IPMVLAN.
Specifies the IP Multicast address range.
Specifies the IPv6 Multicast address range.
default
32
255.255.255.255
IP Multicast VLAN Commands
OmniSwitch CLI Reference Guide June 2012