Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual page 2209

QoS Commands
output definitions
Slot/Port
VPN
Q No
Pri
Wt
Bandwidth Min
Bandwidth Max
Max Bufs
Max Depth
Packets Xmit/Drop
Type
Release History
Release 6.1; command was introduced.
Release 6.1.1; Q No field was added.
Release 6.4.3; slot/port parameter added, Action field deprecated.
Related Commands
policy rule
qos port monitor
OmniSwitch CLI Reference Guide
The physical slot/port numbers associated with the queue.
The virtual port number associated with the queue.
The queue number (0 through 7).
The priority associated with the queue (0 through 7), configured
through the policy action priority
The weight value assigned to each queue. Configured through the
default servicing mode
The minimum bandwidth requirement for the queue.
The maximum bandwidth requirement for the queue (the bandwidth
allowed by the maximum configured for all actions associated with the
queue). Configured through the
command.
The number of buffers associated with the queue.
The maximum queue depth, in bytes. Configured through the
action maximum depth
The number of packets transmitted/dropped from this queue.
The type of queuing performed on this queue (pri, wrr, drr).
Configures a policy rule on the switch. A rule is made up of a condition
(for classifying incoming traffic) and an action (to be applied to outgo-
ing traffic).
Enables QoS statistics monitoring for a specific port.
June 2012
command.
and qos port servicing mode
policy action maximum bandwidth
command.
qos
commands.
policy
page 32-71