Ip Bgp Bestpath Med Missing-As-Worst - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

ip bgp bestpath med missing-as-worst

Configures the MED parameter when it is missing in a BGP path.
ip bgp bestpath med missing-as-worst
no ip bgp bestpath med missing-as-worst
Syntax Definitions
N/A
Defaults
By default this command is disabled.
Platforms Supported
OmniSwitch 6850, 6855, 6850E, 9000E
Usage Guidelines
•
Use the no form of this command to disable missing MEDs as worst.
•
This command is used to specify how a missing MED in an external BGP path is to be treated for route
selection purposes. The default behavior is to treat missing MEDs as zero (best). This command allows
you to treat missing MEDs as worst (2
•
The BGP protocol must be disabled (using the
Examples
-> ip bgp bestpath med missing-as-worst
-> no ip bgp bestpath med missing-as-worst
Release History
Release 6.1; command was introduced.
Related Commands
ip bgp always-compare-med
MIB Objects
alaBgpGlobal
alaBgpMissingMed
page 25-18
32
-1) for compatibility reasons.
ip bgp status
Forces BGP to consider MED values from external routes.
command) before using this command.
OmniSwitch CLI Reference Guide
BGP Commands
June 2012