BGP Commands
ip bgp aggregate-address status
Enables or disables a BGP aggregate route.
ip bgp aggregate-address ip_address ip_mask status {enable | disable}
Syntax Definitions
ip_address
ip_mask
enable
disable
Defaults
parameter
enable | disable
Platforms Supported
OmniSwitch 6850, 6855, 6850E, 9000E
Usage Guidelines
•
Configure all aggregate route parameters before enabling the aggregate with this command. Use the
bgp aggregate-address
•
The
show ip bgp path
Examples
-> ip bgp aggregate-address 172.22.2.0 255.255.255.0 status enable
-> ip bgp aggregate-address 172.22.2.0 255.255.255.0 status disable
Release History
Release 6.1; command was introduced.
OmniSwitch CLI Reference Guide
32-bit IP address for this aggregate route.
32-bit subnet mask that determines how many bits of the network
address denote the network number.
Enables this aggregate route.
Disables this aggregate route.
default
disable
command to configure individual aggregate parameters.
command displays every aggregate currently defined.
June 2012
ip
page 25-33