BGP Commands
ip bgp policy route-map lpref
Configures the local preference value for the route map.
ip bgp policy route-map name sequence_number lpref value
Syntax Definitions
name
sequence_number
value
Defaults
parameter
value
Platforms Supported
OmniSwitch 6850, 6855, 6850E, 9000E
Usage Guidelines
•
This command is used in conjunction with
next line shows the combined usage.
•
In this example, the local preference value will be incremented for a matching route by 555.
Examples
-> ip bgp policy route-map routemap1 1 lpref 555
-> ip bgp policy route-map routemap1 1 lpref 555 lpref-mode inc
Release History
Release 6.1; command was introduced.
Related Commands
ip bgp policy prefix6-list
ip bgp policy route-map lpref-
mode
MIB Objects
alaBgpRouteMapTable
alaBgpRouteMapLocalPref
OmniSwitch CLI Reference Guide
The route map name.
The route map sequence number. The valid range is 1–255.
The local preference value. The valid range is 0–4294967295
default
0
ip bgp policy route-map
Creates or deletes a policy route map.
Configures the action to be taken when setting local preference
attribute for a local matching route.
June 2012
lpref-mode. The example on the
page 25-131