Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual page 1805

Server Load Balancing Commands
The name of an HTTP/HTTPS probe is specified:
-> show ip slb probes phttp
Probe phttp
Type
Period (seconds)
Timeout (milliseconds)
Retries
Port
Username
Password
Expect
Status
URL
Output fields are described here:
output definitions
Probe
Type
Period
Timeout
Retries
Port
Username
Password
Expect
Status
URL
Release History
Release 6.1; command was introduced.
OmniSwitch CLI Reference Guide
: HTTP,
: 60,
: 3000,
: 3,
: 0,
: ,
: ,
: ,
: 200,
: /,
The user-specified name of the probe.
The type of probe.
The period (in seconds) to check the health of servers.
The timeout (in seconds) used to wait for probe answers.
The number of probe retries before deciding that a server is out of ser-
vice.
The TCP/UDP port on which the probe is sent.
The configured user name sent to a server as credentials for an HTTP
GET operation for the probe.
The configured password for the probe.
The configured ASCII string used to compare a response from a server
to verify the health of the server.
The expected status returned from an HTTP GET to verify the health of
a server.
The configured URL sent to a server for an HTTP GET to verify the
health of the server.
June 2012 page 26-45