Ip Bgp Policy Route-Map Aspath-List - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

ip bgp policy route-map aspath-list

Assigns an AS path matching list to the route map.
ip bgp policy route-map name sequence_number aspath-list as_name
Syntax Definitions
name
sequence_number
as_name
Defaults
parameter
as_name
Platforms Supported
OmniSwitch 6850, 6855, 6850E, 9000E
Usage Guidelines
•
By default, no AS path list is assigned to a route map.
•
This default behavior can be reset by changing the value of the AS path list name to "none".
•
The ip bgp policy aspath-list
set permit/deny actions for an AS path list.
Examples
-> ip bgp policy route-map routemap1 1 aspath-list aspathlist1
-> ip bgp policy route-map routemap1 1 aspath-list none
Release History
Release 6.1; command was introduced.
Related Commands
ip bgp policy prefix6-list
MIB Objects
alaBgpRouteMapTable
alaBgpRouteMapAsPathMatchListId
page 25-124
The route map name.
The route map sequence number. The valid range is 1–255.
The AS path list name or "none".
default
none
and ip bgp policy aspath-list action
Creates or deletes a policy route map.
commands are used to create and
OmniSwitch CLI Reference Guide
BGP Commands
June 2012