DVMRP Commands
ip dvmrp interface
Enables or disables the DVMRP protocol on a specified interface.
ip dvmrp interface {interface_name}
no ip dvmrp interface {interface_name}
Syntax Definitions
interface_name
Defaults
N/A
Platforms Supported
OmniSwitch 6850, 6855, 6850E, 9000E
Usage Guidelines
Use the no form of this command to delete an interface.
Examples
-> ip dvmrp interface vlan-10
-> no ip dvmrp interface vlan-10
Release History
Release 6.1; command was introduced.
Release 6.1.1; ip_address parameter deprecated.
Related Commands
ip dvmrp status
ip dvmrp interface metric
show ip dvmrp interface
MIB Objects
dvmrpInterfaceTable
dvmrpInterfaceLocalAddress
dvmrpInterfaceStatus
OmniSwitch CLI Reference Guide
The name of the interface.
Globally enables or disables the DVMRP protocol on the switch.
Configures the distance metric for an interface, which is used to cal-
culate distance vectors.
Displays information for all multicast-capable interfaces.
June 2012
page 29-7