Table 15: Show Cpm Ipv6 Filter Output Fields - Alcatel-Lucent 7450 System Management Manual

Security Commands
ipv6-filter
Syntax ipv6-filter [entry entry-id]
Context show>system>security>cpm-filter
Description
This command displays CPM IPv6 filters.
Parameters entry entry-id — Identifies a CPM filter entry as configured on this system.
cpm-queue
Syntax cpm-queue queue-id
Context show>system>security
Description Displays CPM queues.
Parameters queue-id — Specifies an integer value that identifies a CPM queue.
CPM queue Output — The following table describes CPM queue output fields..

Table 15: Show CPM IPv6 Filter Output Fields

Sample Output
A:ALA-35# show system security cpm-queue 1001
===============================================================================
CPM Queue Entry
===============================================================================
Queue Id
-------------------------------------------------------------------------------
Queue Parameters :
-------------------------------------------------------------------------------
PIR
CBS
===============================================================================
A:ALA-35#
Page 238
Values
1 — 2048
Values 0, 33 — 2000
Label
PIR
CIR
CBS
MBS
: 1001
: 10000000
: 4096
Displays the administrative Peak Information Rate (PIR) for the queue.
Displays the amount of bandwidth committed to the queue.
Displays the amount of buffer drawn from the reserved buffer portion
of the queue's buffer pool.
Displays the maximum queue depth to which a queue can grow.
CIR
MBS
7450 ESS System Mangement Guide
Description
: 1000000
: 8192