Ip Slb Cluster Ping Period - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

Server Load Balancing Commands

ip slb cluster ping period

Modifies the number of seconds to check the health of the servers in a Server Load Balancing cluster.
ip slb cluster cluster_name ping period seconds
Syntax Definitions
cluster_name
seconds
Defaults
parameter
seconds
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 9000E
Usage Guidelines
If you do not set the ping period to zero, then the ping period must be greater than or equal to the ping
timeout value divided by 1000. Use the
value.
Examples
-> ip slb cluster hr_servers ping period 120
-> ip slb cluster "mail servers" ping period 0
Release History
Release 6.1; command was introduced.
OmniSwitch CLI Reference Guide
The name of the Server Load Balancing (SLB) cluster.
The number of seconds for the ping period. Specifying 0 (zero) will
disable the ping. The valid range for the ping period is 0–600 seconds.
default
60
ip slb cluster ping timeout
June 2012
command to modify the ping timeout
page 26-7