IS-IS Commands
ip isis interface level metric
Configures the metric value of the specified IS-IS level of the interface.
ip isis interface interface_name level [1 | 2] metric number
no ip isis interface interface_name level [1 | 2] metric
Syntax Definitions
interface_name
1
2
number
Defaults
parameter
number
Platforms Supported
OmniSwitch 6850, 6850E, 9000E
Usage Guidelines
•
Use the no form of this command to restore the default value.
•
To calculate the lowest cost to reach a destination, each configured level on each interface must have a
cost.
Examples
-> ip isis interface interface-1 level 1 metric 25
-> no ip isis interface interface-2 level 2 metric
Release History
Release 6.2.1; command was introduced.
OmniSwitch CLI Reference Guide
The name of the interface.
Specifies the IS-IS level as Level-1.
Specifies the IS-IS level as Level-2.
The metric value (1–16777215) assigned for the specified level of the
interface.
default
10
June 2012
page 24-75