Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual page 1985

DVMRP Commands
output definitions (continued)
TTL
Status
Release History
Release 6.1; command was introduced.
Related Commands
ip dvmrp tunnel
ip dvmrp tunnel ttl
MIB Objects
tunnelIfTable
tunnelIfLocalAddress
tunnelIfRemoteAddress
tunnelIfHopLimit
dvmrpInterfaceGroup
dvmrpInterfaceStatus
OmniSwitch CLI Reference Guide
The current Time to Live (TTL) value. A value of 0 indicates that the
value is copied from the payload's header. Values may range from
0–255.
The corresponding interface status. Options include Enabled or
Disabled. If the interface specified by the local address has been con-
figured and is operationally enabled, the status is Enabled. If the inter-
face is down, the value displayed is Disabled.
Adds or deletes a DVMRP tunnel.
Configures the TTL value for the tunnel defined for the specified
local address and remote address.
June 2012 page 29-39