Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual page 1716

output definitions (continued)
ICL
LCL
AGG
AGC
AGL
AGW
AGH
GDL
DMP
ACT
Release History
Release 6.1.5; command was introduced.
Related Commands
show ipv6 bgp path
MIB Objects
alaBgpRoute6Table
alaBgpRoute6Addr
alaBgpRoute6MaskLen
alaBgpRoute6State
alaBgpRoute6IsHidden
alaBgpRoute6IsAggregate
alaBgpRoute6IsAggregateContributor
alaBgpRoute6IsAggregateList
alaBgpRoute6IsAggregateWait
alaBgpRoute6IsOnEbgpChgList
alaBgpRoute6IsOnIbgpClientChgList
alaBgpRoute6IsOnIbgpChgList
alaBgpRoute6IsOnLocalChgList
alaBgpRoute6IsOnDeleteList
alaBgpRoute6IsDampened
page 25-204
Internal BGP change list. When Yes, this route has changes that need to
be advertised.
Local change list. When Yes, this route is local.
Aggregation. When Yes, this route is an aggregate route.
Aggregation contribution. When Yes, this route is part of an aggregate
route.
Aggregation list. When Yes, this route is placed on an aggregate list.
Aggregation waiting. When Yes, this route is waiting for an aggregate
contributor.
Aggregation hidden. When Yes, this route is hidden as part of an aggre-
gate route.
Deletion list. When Yes, this route will be deleted.
Dampening. Indicate whether this route has been dampened. If 'Yes',
then this route has been dampened and a dampening history exists.
Active route. When Yes, the route is active.
Displays the known IPv6 BGP paths for all the routes or a specific
route.
OmniSwitch CLI Reference Guide
BGP Commands
June 2012