Ip Dvmrp Debug-Type - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

DVMRP Commands

ip dvmrp debug-type

Enables or disables DVMRP debugging for a specified message type, or for all message types.
Note. Debugging for a specified message type will only be enabled if its debug level is a value greater
than zero (i.e., 1–255). For information on specifying the debug level, refer to the
ip dvmrp debug-level command on page
ip dvmrp debug-type message_type
no ip dvmrp debug-type message_type
Syntax Definitions
message_type
supported message types
all
error
flash
graft
igmp
ipmrm
init
mip
misc
nbr
probes
prunes
routes
time
tm
OmniSwitch CLI Reference Guide
29-22.
Enables or disables DVMRP debugging for the specified item. Select
from the list below. You may enter multiple message types in any order.
For example, ip dvmrp debug-type time flash init.
descriptions
Enables or disables DVMRP debugging for all items listed below. The
syntax all can be used to easily turn debugging for all message types on
or off.
Enables or disables debugging for DVMRP Error messages.
Enables or disables debugging for DVMRP Flash processing.
Enables or disables debugging for DVMRP Graft processing.
Enables or disables debugging for DVMRP Internet Group Management
Protocol (IGMP) packet processing.
Enables or disables debugging for DVMRP IP Multicast Routing Man-
ager (IPMRM) interaction.
Enables or disables debugging related to DVMRP initialization code.
Enables or disables debugging for MIP (Management Internal Protocol)
processing. Includes CLI and SNMP.
Enables or disables miscellaneous debugging of DVMRP.
Enables or disables debugging for DVMRP Neighbor processing.
Enables or disables debugging for DVMRP Probe processing.
Enables or disables debugging for DVMRP Prune processing.
Enables or disables debugging for DVMRP Route processing.
Enables or disables debugging for DVMRP Timer processing.
Enables or disables debugging for DVMRP Task Manager interaction.
June 2012 page 29-23