Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual page 2142

Usage Guidelines
•
When QoS is disabled, flows coming into the switch are classified but not matched to a policy. Traffic
is treated as best effort and assigned to default queues.
•
The command keywords may be used with or without enable; these keywords cannot be used with
disable.
Examples
-> qos enable default disposition deny
-> qos disable
-> qos enable
Release History
Release 6.1; command was introduced.
Related Commands
qos apply
policy rule
show policy rule
MIB Objects
alaQoSConfigTable
alaQoSConfigEnable
alaQoSConfigTrustedPorts
alaQoSConfigDefaultQueues
alaQoSConfigAppliedDefaultQueues
alaQoSConfigLogLines
alaQoSConfigLogLevel
alaQoSConfigLogConsole
alaQoSConfigFlowTimeout
alaQoSConfigApliedFlowTimeout
alaQoSConfigFragmentTimeout
alaQoSConfigAppliedFragmentTimeout
alaQoSConfigReflexiveTimeout
alaQoSConfigAppliedReflexiveTimeout
alaQoSConfigNatTimeout
alaQoSConfigAppliedNatTimeout
alaQoSConfigClassifyFragments
alaQoSConfigAppliedClassifyFragments
alaQoSConfigDefaultMulticastDisposition
alaQoSConfigAppliedDefaultMulticastDisposition
alaQoSConfigDefaultDisposition
alaQoSConfigAppliedDefaultDisposition
page 32-4
Applies configured QoS and policy settings to the current configu-
ration.
Configures a policy rule on the switch.
Displays information for policy rules configured on the switch.
OmniSwitch CLI Reference Guide
QoS Commands
June 2012