Show Ip Pim Interface - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

PIM Commands

show ip pim interface

Displays detailed PIM settings for a specific interface. In general, it displays PIM settings for all the inter-
faces if no argument is specified.
show ip pim interface [if_name]
Syntax Definitions
if_name
Defaults
N/A
Platforms Supported
OmniSwitch 6850, 6855, 6850E, 9000E
Usage Guidelines
To view more detailed information about a particular interface, specify the interface name in the command
line. Additional information includes Triggered Hello Interval, Hello Holdtime, Prune Delay status and
value, Override Interval, LAN Delay status, Generation ID status, and Join/Prune Holdtime.
Examples
-> show ip pim interface
Total 1 Interfaces
Interface Name
--------------------+---------------+---------------+--------+--------+--------
tesvl
-> show ip pim interface tesvl
Interface Name
IP Address
Designated Router
Hello Interval
Triggered Hello Interval
Hello HoldTime
Join/Prune Interval
Join/Prune HoldTime
Propagation (Prune) Delay
Override Interval
Generation ID
DR Priority
DR Priority Enabled
Lan Delay Enabled
Effective Propagation Delay = 500,
Effective Override Interval = 2500,
Suppression Enabled
OmniSwitch CLI Reference Guide
The interface name.
IP Address Designated
Router
50.1.1.1 50.1.1.1
= tesvl,
= 50.1.1.1,
= 50.1.1.1,
= 30,
= 5,
= 105,
= 60,
= 210,
= 500,
= 2500,
= 0x46e68b13,
= 1,
= true,
= true,
= true,
June 2012
Hello J/P Oper
Interval Interval Status
100 10 disabled
page 30-53