Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual page 1803

Server Load Balancing Commands
output definitions (continued)
Operational Status
% Avail
Release History
Release 6.1; command was introduced.
Related Commands
show ip slb cluster server
show ip slb clusters
show ip slb cluster
MIB Objects
slbServers
slbServerIpAddress
slbServerClusterName
slbServerAdminStatus
slbServerOperStatus
slbServerFlows
OmniSwitch CLI Reference Guide
The operational state of this server. The possible states are described as
follows:
•
Disabled (this server is administratively disabled).
•
No Answer (this server has not responded to ping requests).
•
Link Down (there is a bad connection to this server).
•
In Service (this server is used for SLB cluster client connections).
•
Discovery (the SLB cluster is pinging this physical server).
•
Retrying (the SLB cluster is making another attempt to bring up
this server).
The percentage of time that this physical server has been available for
processing client requests. In other words, the actual ratio of up time
(In Service plus Retrying) versus down time (No Answer plus Link
Down). Please note that the Disabled and the initial Discovery states
are not counted as down time.
Displays the detailed status and configuration of a single physical server
in a Server Load Balancing cluster.
Displays detailed status and configuration information for all Server
Load Balancing clusters on a switch.
Displays detailed status and configuration information for a single
Server Load Balancing cluster.
June 2012 page 26-43