Show Ipv6 Pim Neighbor - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

show ipv6 pim neighbor

Displays a list of active IPv6 PIM neighbors.
show ipv6 pim neighbor [ipv6_address] [if_name]
Syntax Definitions
ipv6_address
if_name
Defaults
If the neighbor's IPv6 address or interface name is not specified, the entire IPv6 PIM neighbor table is
displayed.
Platforms Supported
OmniSwitch 6850, 6855, 6850E, 9000E
Usage Guidelines
To view more detailed information about a particular neighbor, specify the neighbor's IPv6 address or the
associated interface name in the command line. Additional information will be displayed, which includes
LAN Prune Delay, Override Interval, TBit field, State Refresh capable, and Designated Router option
status.
Examples
-> show ipv6 pim neighbor
Neighbor Address
------------------------------+--------------------+-----------+-----------+------
fe80::2d0:95ff:feac:a537
If a specific neighbor address is specified in the command line, detailed information for the correspond-
ing neighbor only displays:
-> show ipv6 pim neighbor fe80::2d0:95ff:feac:a537
vlan-30
Neighbor IPv6 Address
Uptime
Expires
Lan Prune Delay Present
Propagation Delay
Override Interval
TBit Field
Gen ID Present
Gen ID Value
BiDir Capable
DR Priority Present
DR Priority
State Refresh Capable
page 30-104
The IPv6 address for the PIM neighbor.
The name of the interface.
Interface Name
vlan-30
= fe80::2d0:95ff:feac:a537,
= 02h:57m:09s,
= 00h:01m:40s,
= True,
= 500,
= 2500,
= True,
= True,
= 0x7720c123,
= False,
= True,
= 1,
= True,
Uptime Expires
02h:56m:51s 00h:01m:28s 1
OmniSwitch CLI Reference Guide
PIM Commands
DR Pri
June 2012