Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual page 1800

output definitions (continued)
Admin weight
MAC addr
Slot number
Port number
Admin status
Oper status
Probe
Availability time (%)
Ping failures
Last ping round trip time
(milliseconds)
Probe status
Release History
Release 6.1; command was introduced.
Release 6.4.2; Admin weight field added.
page 26-40
The weight assigned to this physical server.. A weight of 0 (zero)
indicates that no new connections will be assigned to the server. A
higher weight value indicates that the server can accept more network
traffic.
The MAC address of this physical server.
The slot number of the network interface (NI) module to which this
physical server is attached.
The port number to which this physical server is attached.
The current administrative status of this physical server (Enabled or
Disabled).
The operational state of this server. The possible states are described as
follows:
•
Disabled (this server is administratively disabled).
•
No Answer (this server has not responded to ping requests).
•
Link Down (there is a bad connection to this server).
•
In Service (this server is used for SLB cluster client connections).
•
Discovery (the SLB cluster is pinging this physical server).
•
Retrying (the SLB cluster is making another attempt to bring up
this server).
The name of the probe configured for this server.
The percentage of time that this physical server has been available for
processing client requests. In other words, the actual ratio of up time
(In Service plus Retrying) versus down time (No Answer plus Link
Down). Please note that the Disabled and the initial Discovery states
are not counted as down time.
The total number of pings that have failed on this physical server.
The total amount of time (in milliseconds) measured for the last valid
ping to this physical server to make a round trip.
The status of the probe configured for this server.
Server Load Balancing Commands
OmniSwitch CLI Reference Guide June 2012