Ipv6 Bgp Network - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

BGP Commands

ipv6 bgp network

Advertises a locally reachable IPv6 address as an IPv6 BGP network to other BGP peers.
ipv6 bgp network ipv6_address/prefix_length
no ipv6 bgp network ipv6_address/prefix_length
Syntax Definitions
ipv6_address
/prefix_length
Defaults
N/A
Platforms Supported
OmniSwitch 6850, 6855, 6850E, 9000E
Usage Guidelines
Use the no form of this command to turn off the advertisement of locally reachable IPv6 networks.
Examples
-> ipv6 bgp network 2001::1/64
-> no ipv6 bgp network 2001::1/64
Release History
Release 6.1.5; command was introduced.
Related Commands
ipv6 bgp network status
show ipv6 bgp network
MIB Objects
alaBgpNetwork6Table
alaBgpNetwork6Addr
alaBgpNetwork6MaskLen
OmniSwitch CLI Reference Guide
The 128-bit IPv6 address.
The number of bits that are significant in the IPv6 address (mask)
(3..128).
Enables or disables a BGP
Displays the status of all the IPv6 BGP networks or a specific IPv6
BGP network
June 2012
network.
page 25-205