Show Ip Bgp Statistics - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

show ip bgp statistics

Displays BGP global statistics.
show ip bgp statistics
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6850, 6855, 6850E, 9000E
Usage Guidelines
This command show various BGP statistics for the router, such as number of neighbors, active prefixes,
number of paths, etc.
Examples
-> show ip bgp statistics
# of Active Prefixes Known
# of EBGP Neighbors in Established State
# of IBGP Neighbors in Established State
# of Feasible Paths
# of Dampened Paths
# of Unsynchronized Paths
# of Policy unfeasible paths
Total Number of Paths
output definitions
# of Active Prefixes Known
# of EBGP Neighbors in
Established State
# of IBGP Neighbors in
Established State
# of Feasible Paths
# of Dampened Paths
# of Unsynchronized Paths
page 25-152
= 0,
= 0,
= 0,
= 0,
= 0,
= 0,
= 0,
= 0
The number of prefixes, or route paths, currently known to the local
BGP speaker, that are currently up and active.
The number of peers outside the AS of the local BGP speaker that the
local BGP speaker can route to.
The number of peers in the same AS as the local BGP speaker that the
local BGP speaker can route to.
The number of route paths that are not active due to one of the follow-
ing reasons: the route is dampened, the route is not permitted based on
BGP policies, or the route is waiting to be synchronized with the IGP
protocol.
The number of route paths that are not active because they have vio-
lated dampening parameters.
The number of route paths that are not active because they are waiting
to be synchronized with the IGP routing protocol.
OmniSwitch CLI Reference Guide
BGP Commands
June 2012