Ip Bgp Aggregate-Address Summary-Only - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

BGP Commands

ip bgp aggregate-address summary-only

Enables or disables aggregate summarization, which supresses more-specific routes. Disabling aggregate
summarization means that more-specific routes will be announced to BGP peers (internal and external
peers).
ip bgp aggregate-address ip_address ip_mask summary-only
no ip bgp aggregate-address ip_address ip_mask summary-only
Syntax Definitions
ip_address
ip_mask
Defaults
This command is enabled by default.
Platforms Supported
OmniSwitch 6850, 6855, 6850E, 9000E
Usage Guidelines
•
Use the no form of this command to disable this feature.
•
This command specifies whether more-specific routes should be announced or suppressed.
•
By default, aggregate summarization is enabled, which means that only the aggregate entry (for exam-
ple, 100.10.0.0) is advertised. Advertisements of more-specific routes (for example, 100.10.20.0) are
suppressed.
Examples
-> ip bgp aggregate-address 172.22.2.115 255.255.255.0 summary-only
-> no ip bgp aggregate-address 172.22.2.115 255.255.255.0 summary-only
Release History
Release 6.1; command was introduced.
Related Commands
ip bgp aggregate-address
OmniSwitch CLI Reference Guide
IP address for the aggreagte route.
32-bit subnet mask that determines how many bits of the IP address
denote the network number.
Creates and deletes a BGP aggregate route.
June 2012 page 25-43