ipv6 bgp neighbor in-prefix6list
Configures an inbound BGP prefix6-list policy for an IPv6 BGP peer.
ipv6 bgp neighbor peer6_address in-prefix6list pfx_list_name
Syntax Definitions
peer6_address
pfx_list_name
Defaults
N/A
Platforms Supported
OmniSwitch 6850, 6855, 6850E, 9000E
Usage Guidelines
•
The prefix list name (uniqLocal in the example below) is created using the
command. Any outbound routes from the BGP peer must match this prefix filter before being adver-
tised or passed to outbound policy.
•
BGP neighbor must be configured.
Examples
-> ipv6 bgp neighbor 2021::10 in-prefix6list uniqLocal
Release History
Release 6.3.4; command was introduced.
Related Commands
ip bgp policy prefix6-list
MIB Objects
alaBgpPeerTable
alaBgpPeer6Addr
alaBgpPeer6Prefix6ListIn
page 25-220
The 128-bit IPv6 address of the BGP peer.
An Output prefix list name (1 - 70 characters).
Creates or deletes a BGP prefix6-list policy for filtering IPv6 pre-
fixes.
ip bgp policy prefix6-list
OmniSwitch CLI Reference Guide
BGP Commands
June 2012