Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual page 1756

output definitions (continued)
Last sent Notification reason
Time last msg was sent
Release History
Release 6.1.5; command was introduced.
Related Commands
show ipv6 bgp neighbors
MIB Objects
alaBgpPeer6Table
alaBgpPeer6Addr
alaBgpPeer6RcvdMsgs
alaBgpPeer6SentMsgs
alaBgpPeer6RcvdUpdMsgs
alaBgpPeer6SentUpdMsgs
alaBgpPeer6LastTransitionTime
alaBgpPeer6LastUpTime
alaBgpPeer6BgpId
alaBgpPeer6LocalIntfName
alaBgpPeer6RestartTime
alaBgpPeer6RestartState
alaBgpPeer6RestartFwdState
alaBgpPeer6Ipv6Unicast
alaBgpPeer6HoldTime
alaBgpPeer6KeepAlive
alaBgpPeer6ConnRetryInterval
alaBgpPeer6HoldTimeConfigured
alaBgpPeer6KeepAliveConfigured
alaBgpPeer6Ipv4NextHop
alaBgpPeer6Ipv6NextHop
page 25-244
NOTIFY messages include errors codes. These error codes are listed in
this field. They apply to the last NOTIFY message sent by this peer.
The notification reasons are listed in two parts separated by a dash (-).
See the list of possible notification reasons under the description for the
Peer last received notification reason field above.
The duration since a message was sent to this peer.
Displays the configured IPv6 BGP peers.
OmniSwitch CLI Reference Guide
BGP Commands
June 2012