show qos port monitor
Displays ports that are enabled to monitor egress CoS transmit and drop statistics.
show qos port monitor
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855
Usage Guidelines
•
This command displays ports that were configured to enable statistics monitoring using the
monitor
command.
•
Note that this command is not required on the OmniSwitch 9000E, as QoS monitoring is automatically
active on all ports for these switches.
Examples
-> show qos port monitor
NI
Port
--------+---------
1
1/10
2
2/5
3
3/16
4
4/26
5
5/25
output definitions
NI
Port
Release History
Release 6.4.3; command was introduced.
page 32-68
The slot number.
The slot/port number for the switch port.
OmniSwitch CLI Reference Guide
QoS Commands
qos port
June 2012