ip pim max-rps
Configures the maximum number of C-RP routers allowed in the PIM-SM domain.
ip pim max-rps number
Syntax Definitions
number
Defaults
parameter
number
Platforms Supported
OmniSwitch 6850, 6855, 6850E, 9000E
Usage Guidelines
•
This command is supported only in the sparse mode.
•
This command is used with both IPv4 and IPv6 PIM-SM. The PIM-SM must be disabled before chang-
ing max-rps value.
•
PIM-SM must be globally disabled before changing the maximum number of C-RP routers. To
globally disable PIM-SM, refer to the
Examples
-> ip pim max-rps 32
Release History
Release 6.1.1; command was introduced.
page 30-20
The maximum number of C-RP routers allowed in the PIM-SM domain
(1–100).
default
32
ip pim sparse status command on page
30-5.
OmniSwitch CLI Reference Guide
PIM Commands
June 2012