Ipv6 Bgp Neighbor Clear Soft - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

BGP Commands

ipv6 bgp neighbor clear soft

Invokes an inbound or outbound policy reconfiguration for an IPv6 BGP peer.
ipv6 bgp neighbor peer6_address clear soft {in | out}
Syntax Definitions
peer6_address
in
out
Defaults
N/A
Platforms Supported
OmniSwitch 6850, 6855, 6850E, 9000E
Usage Guidelines
•
This command reconfigures (or reapplies) all inbound or outbound policies to existing routes without
restarting the IPv6 peer session.
•
This command is useful if policies have been changed.
•
BGP neighbour must be configured.
Examples
-> ipv6 bgp neighbor 2001::1 clear soft in
-> ipv6 bgp neighbor 2001::1 clear soft out
Release History
Release 6.3.4; command was introduced.
Related Commands
ipv6 bgp neighbor soft-
reconfiguration
MIB Objects
alaBgpPeerTable
alaBgpPeer6ddr
alaBgpPeer6ReconfigureInBound
alaBgpPeer6ReconfigureOutound
OmniSwitch CLI Reference Guide
The 128-bit IPv6 address of the BGP peer.
Restarts inbound policy evaluation of the peer.
Restarts outbound policy evaluation of the peer.
Enables or disables IPv6 BGP peer soft reconfiguration.
June 2012 page 25-217