Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual page 2040

output definitions
Origin
Group Address/Prefix Length The 32-bit IP address for a multicast group, along with the mask length,
RP Address
Mode
Mapping Precedence
Release History
Release 6.3.1; command was introduced.
Related Commands
ip pim ssm group
ip pim dense group
ip pim static-rp
MIB Objects
alaPimGroupMappingTable
alaPimGroupMappingOrigin
alaPimGroupMappingGrpAddress
alaPimGroupMappingPrecedence
alaPimGroupMappingRPAddress
alaPimGroupMappingPimMode
alaPimGroupMappingGrpPrefixLength
page 30-52
The mechanism by which the PIM mode and RP for the group
were learned. The possible values include 'static RP' for local static RP
configuration, 'static SSM' for both SSM group configuration and
Dense Mode Group configuration, and 'BSR' for the PIM Bootstrap
Router mechanism.
shown in bits. The group IP address and mask are separated by a slash
( / ).
The IP address of the Rendezvous Point to be used for groups within
the group prefix. There is no RP address if the PIM mode is either SSM
or DM.
The PIM mode to be used for groups in this prefix.
The precedence value of a particular row, which determines which row
applies to a given group address. Numerically higher values for this
object indicate lower precedences, with the value zero denoting the
highest precedence.
Creates and manages the static configuration of a Source Specific Multi-
cast mode group mappings.
Creates and manages the static configuration of dense mode (DM) group
mappings.
Adds, modifies, or deletes a static RP for a group ("modifies" applies
only to the RP address, since the table is indexed from group address
and mask parameters).
OmniSwitch CLI Reference Guide
PIM Commands
June 2012