Avaya S8700 Maintenance Manual page 57

For multi-connect configurations

Hide thumbs Also See for S8700:

Table of Contents

PNC Cabling — Fiber Hardware

H600-348, G-( )

Fully duplicated

Figure 2-2. Typical DS1 CONV Connections to Remote EPNs

1. Place duplicate pairs in different carriers.

2. When removing two or more, the maximum cable distance between any

two remoted endpoints is 100 miles (161 km). For example, if one EPN is

75 miles (121 km) from the switch node cabinet, then no other EPN can be

more than 25 miles (40.2 km) from the same switch node cabinet.

3. Use a 846447637 within a carrier for a TN574, use a 847245750 within a

carrier for a TN1654.

Use a 846448645 within a cabinet between carriers for a TN574, use a

847245768 within a cabinet between carriers for TN1654.

cross connect,

H600-348, G-( )

H600-348, G-( )

H600-348, G-( )

cross connect,

Issue 1 May 2002

cydfep31 KLC 032001

Troubleshooting