Cisco ASR 14000 Series Management Command Reference page 134

load commit changes
load commit changes
To populate the target configuration with changes from previous configuration commits, use the load
commit changes command in global configuration or administration configuration mode. To remove the
configuration, use the no form of this command.
Syntax Description
commit-id
since commit-id
last number-of-commits Loads the configuration changes into the target buffer that have been made
Command Modes
Global configuration
Administration configuration
Command History Release
Release 3.7.1
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
Use the load commit changes to populate the target configuration with changes from previous
configuration commits. The changes are not applied until you enter the commit command.
Use the
Task ID Task ID
config-services
Examples The following example shows how to populate the target configuration with changes from a previous
configuration commit:
RP/0/RP0/CPU0:router(config)# load commit changes since 1000000006
Building configuration...
Loading.
223 bytes parsed in 1 sec (222)bytes/sec
Cisco ASR 14000 Series Router System Management Command Reference
SMR-132
load commit changes {commit-id | since commit-id | last number-of-commits}
Specific configuration commit.
Loads all configuration changes committed into the target buffer since (and
including) a specific configuration commit, commit-id.
during the last number of configuration commits specified with the
number-of-commits argument.
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
show configuration (config)
Operations
read, write
Configuration Management Commands on Cisco IOS XR Software
command to display the target configuration.
OL-17231-01