Cisco ASR 14000 Series Management Command Reference page 305

Hardware Redundancy and Node Administration Commands on Cisco IOS XR Software
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
The raw keyword is primarily intended for troubleshooting problems with the show inventory command
Note
itself.
If any of the Cisco products do not have an assigned PID, then the output may display incorrect PIDs,
and the version ID (VID) and serial number (SN) elements may be missing.
For UDI compliance products, the PID, VID, and SN are stored in EEPROM and NVRAM. Use the show
inventory command to display this information.
Task ID Task ID
sysmgr
Examples The following is partial sample output from the show inventory command with the raw keyword:
RP/0/RP0/CPU0:router(admin)# show inventory raw
NAME: "0/1/*", DESCR: "Cisco ASR 14000 Series Modular Services Card"
PID: ASR14K-MSC
NAME: "0/1/* - host", DESCR: "host"
PID:
NAME: "0/1/* - host - Inlet0", DESCR: "Temperature Sensor"
PID:
NAME: "0/1/* - host - Inlet1", DESCR: "Temperature Sensor"
PID:
NAME: "0/1/* - host - Exhaust0", DESCR: "Temperature Sensor"
PID:
NAME: "0/1/* - host - Exhaust1", DESCR: "Temperature Sensor"
PID:
NAME: "0/1/* - host - Hotspot0", DESCR: "Temperature Sensor"
PID:
NAME: "0/1/* - host - 1.25V_ME0", DESCR: "Voltage Sensor"
PID:
--More--
OL-17231-01
Operations
read
, VID: V02, SN: SAD09280BS9
, VID: N/A, SN:
, VID: N/A, SN:
, VID: N/A, SN:
, VID: N/A, SN:
, VID: N/A, SN:
, VID: N/A, SN:
, VID: N/A, SN:
Cisco ASR 14000 Series Router System Management Command Reference
show inventory
SMR-303