Cisco ASR 14000 Series Management Command Reference page 279

Hardware Redundancy and Node Administration Commands on Cisco IOS XR Software
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
Task ID Task ID
system
Examples The following is sample output from the show environment command with the temperatures keyword:
RP/0/RP0/CPU0:router# show environment temperatures
R/S/I
0/2/*
0/RP1/* host
0/SM0/* host
Table 28
Table 28
Field
R/S/I
Modules
Inlet Temperature (deg C)
Exhaust Temperature (deg C)
Hotspot Temperature (deg C)
The following is sample output from the show environment command the with the leds keyword:
RP/0/RP0/CPU0:router# show environment leds
0/2/*: Module (host) LED status says: OK
0/2/*: Module (plimasic) LED status says: OK
0/SM0/*: Module (host) LED status says: OK
OL-17231-01
Operations
read
Modules Inlet
Temperature
(deg C)
host 31, 27
cpu
fabricq0
fabricq1
ingressq
egressq
ingresspse
egresspse
plimasic 30, 31
38
cpu
ingressq
fabricq0
29, 29
describes the significant fields shown in the display.
show environment temperatures Field Descriptions
Description
Rack number, slot number, and interface for which information is
displayed, in the format rack_num/slot_num/*.
Module for which temperature information is displayed.
Current temperature of the inlet sensor in degrees Celsius.
Note
Current temperature of the exhaust sensor in degrees Celsius.
Note
Displays the current temperature of the hotspot in degrees Celsius.
Cisco ASR 14000 Series Router System Management Command Reference
Exhaust Hotspot
Temperature Temperature
(deg C) (deg C)
43, 45 48
31
46
44
34
41 43
35
42
42
44
36
42
43
41, 33
The inlet temperature corresponds to the room air
temperature entering the router.
The exhaust temperature corresponds to the air being
exhausted from the router.
show environment
SMR-277