Cisco ASR 14000 Series Management Command Reference page 336

clear install label
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
clear install label
To clear a label from an installation rollback point, use the clear install label command in EXEC or
administration EXEC mode.
Syntax Description
label
Defaults No default behavior or values
Command Modes EXEC
Administration EXEC
Command History Release
Release 3.7.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
Use the clear install label command to remove a label associated with an installation rollback point.
Labels are assigned using the install label command.
Task ID Task ID
pkg-mgmt
Examples In the following example, the label brians_smu is removed from the associated installation rollback
point.
RP/0/RP0/CPU0:router# clear install label brians_smu
Install operation 6 'clear install label brians_smu' started by user 'usr'
on SDR Owner via CLI at 09:28:04 DST Thu Aug 09 2007.
Install operation 6 completed successfully at 09:28:04 DST Thu Aug 09 2007.
Related Commands Command
install label
Cisco ASR 14000 Series Router System Management Command Reference
SMR-334
clear install label label
Label defined for an installation rollback point.
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Operations
read, write
Description
Adds a label or description to both the current active software state and a
state associated with a rollback point.
Software Package Management Commands on Cisco IOS XR Software
OL-17231-01