Cisco ASR 14000 Series Management Command Reference page 631

SNMP Server Commands on Cisco IOS XR Software
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
Defaults SNMP notifications are disabled by default.
Command Modes Global configuration
Command History Release
Release 3.7.1
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
Use the snmp-server traps command to enable trap requests for the specified notification types. To
configure the router to send SNMP notifications, specify at least one snmp-server traps command.
When the command is entered with no keyword, all notification types are enabled. When a notification
type keyword is specified, only the notification type related to that keyword is enabled. To enable
multiple types of notifications, issue a separate snmp-server traps command for each notification type.
More information about individual MIBs can be found in the SNMP Object Navigator, available through
cisco.com at http://tools.cisco.com/Support/SNMP/do/BrowseMIB.do?local=en&step=2.
The snmp-server traps command is used with the
host command to specify which host or hosts receive SNMP notifications.
Task ID Task ID
snmp
Some SNMP trap notifications require additional Task IDs as indicated in the following table:
OL-17231-01
• pim—Enables SNMP PIM traps.
rf—Enables RF-MIB traps.
•
• sbc-dbl—Enables SNMP SBC dynamic blacklist traps.
• sbc-mgm—Enables SNMP SBC Media Gateway Manager (MGM) traps.
sensor—Enables SNMP entity sensor traps.
•
snmp—Enables SNMP traps.
•
sonet—Enables SONET traps.
•
syslog—Controls error message notifications (Cisco-syslog-MIB).
•
Specify the level of messages to be sent with the logging history
command.
• vpls—Enables virtual private LAN service (VPLS) traps.
To display the trap notifications supported on a platform, use the online
Note
help (?) function.
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Operations
read, write
Cisco ASR 14000 Series Router System Management Command Reference
snmp-server host command. Use the snmp-server
snmp-server traps
SMR-629