Cisco ASR 14000 Series Management Command Reference page 220

template
After configuring a template, you may want to display the contents of the configured template. To
Note
display a template configuration, use the show running-config command with the template keyword
and name argument.
The following is sample output from the show running-config command with the template keyword
and name argument. In this example, the output displays the contents of a template named "pre-pos."
RP/0/RP0/CPU0:router# show running-config template pre-pos
template pre-pos
interface preconfigure POS0/1/0/0
ipv4 address 10.3.32.154 255.0.0.0
!
end-template
Related Commands Command
apply-template
end-template
show running-config
Cisco ASR 14000 Series Router System Management Command Reference
SMR-218
Configuration Management Commands on Cisco IOS XR Software
Description
Applies a template to the target configuration.
Exits template configuration mode.
Displays the current running (active) configuration.
OL-17231-01