Cisco ASR 14000 Series Management Command Reference page 563

Process and Memory Management Commands on Cisco IOS XR Software
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
show placement policy
To display placement policy parameters and programs, use the show placement policy command in
EXEC mode.
Syntax Description
global
program
program
all
default
Command Default
No default behavior or values
Command Modes EXEC
Command History Release
Release 3.7.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
The show placement policy command displays placement policy items that influence program or
process placement. The global option lists the per node threshold parameters, and the remaining options
list the policy based on program.
If you configured the placement policy, the scope could be the default program, a given program, or even
a particular program instance. Alternatively, the policy could be specified in a placement file (entered
by the system) with different levels of affinities. To view all this information, you can specify the
program all option to display the source of each program, and the policy applied to the default program
or the program that you configured to override it.
Task ID Task ID
sysmgr
Examples The following example shows how to display the global parameters for the placement policy:
RP/0/RP0/CPU0:router# show placement policy global
Per-location placement policy parameters
----------------------------------------
OL-17231-01
show placement policy {global | program {program | all | default}}
Displays system-wide placement policies.
Displays program placement policies.
Specific program or program group.
Displays all program placement policies.
Displays the default placement policies.
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Operations
read
Cisco ASR 14000 Series Router System Management Command Reference
show placement policy
SMR-561