Cisco ASR 14000 Series Management Command Reference page 634

snmp-server traps bgp
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
For a complete description of these notifications and additional MIB functions, see the BGP4-MIB in
the SNMP Object Navigator, available through cisco.com at
http://tools.cisco.com/Support/SNMP/do/BrowseMIB.do?local=en&step=2.
The snmp-server traps bgp command is used with the
snmp-server host
Task ID Task ID
snmp
bgp
Examples The following example shows how to enable the router to send BGP state-change notifications to the host
at the address myhost.cisco.com using the community string defined as public:
RP/0/RP0/CPU0:Router(config)# snmp-server traps bgp
RP/0/RP0/CPU0:Router(config)# snmp-server host myhost.cisco.com version 2c public
Related Commands Command
snmp-server engineid
snmp-server host
snmp-server traps snmp
snmp-server traps syslog
Cisco ASR 14000 Series Router System Management Command Reference
SMR-632
::= {bgpTraps 2}
command to specify which host or hosts receive SNMP notifications.
Operations
read, write
read, write
Description
Specifies the identification number of the local SNMP engine.
Specifies the recipient of an SNMP notification operation.
Enables RFC 1157 SNMP notifications.
Enables SNMP notifications for Cisco-syslog-MIB error messages.
SNMP Server Commands on Cisco IOS XR Software
snmp-server host command. Use the
OL-17231-01