Cisco ASR 14000 Series Management Command Reference page 95

Configuration Management Commands on Cisco IOS XR Software
admin
To enter administration EXEC mode, use the admin command in EXEC mode.
Syntax Description This command has no arguments or keywords.
Defaults No default behavior or values
Command Modes EXEC
Command History Release
Release 3.7.1
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
Use the admin command to enter administration EXEC mode. Administration EXEC mode is used to
execute various administration plane commands.
Administration commands can be run only by entering administration mode and not by prefixing the
Note
command with the admin keyword in EXEC mode.
Task ID Task ID
admin
Examples The following example shows how to enter administration EXEC mode:
RP/0/RP0/CPU0:router# admin
RP/0/RP0/CPU0:router(admin)#
To use administration configuration mode, use the configure command in administration EXEC mode:
RP/0/RP0/CPU0:router# admin
RP/0/RP0/CPU0:router(admin)# configure
RP/0/RP0/CPU0:router(admin-config)#
Related Commands Command
configure
OL-17231-01
admin
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Operations
read, write, execute
Description
Enters global configuration mode.
Cisco ASR 14000 Series Router System Management Command Reference
admin
SMR-93