Cisco ASR 14000 Series Management Command Reference page 210

show default-afi-safi-vrf
show default-afi-safi-vrf
To display the default address family identifier (AFI), subaddress family identifier (SAFI) and VPN
routing and forwarding (VRF) instance for the current session, use the show default-afi-safi-vrf
command in EXEC mode.
Syntax Description
This command has no arguments or keywords.
Defaults
No defaults behavior or values
Command Modes
EXEC
Command History Release
Release 3.7.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
Use the show default-afi-safi-vrf command to display the default AFI and SAFI settings for the current
session. The AFI and SAFI settings are controlled by the following commands:
•
•
•
Task ID Task ID
basic-services
Examples The following is sample output from the show default-afi-safi-vrf command:
RP/0/RP0/CPU0:router# show default-afi-safi-vrf
%% Default AFI/SAFI/VRF for this session is:
Related Commands
Cisco ASR 14000 Series Router System Management Command Reference
SMR-208
show default-afi-safi-vrf
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
set default-afi
set default-safi
set default-vrf
Operations
read
Address Family Identifier:
Sub-Address Family Identifier:
Virtual Routing/Forwarding:
Configuration Management Commands on Cisco IOS XR Software
'ipv4'
'unicast'
''
OL-17231-01