Cisco ASR 14000 Series Management Command Reference page 615

SNMP Server Commands on Cisco IOS XR Software
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
snmp-server ifmib ifalias long
To enable the ifAlias IF-MIB object to accept an interface alias name that exceeds the 64-byte default,
use the snmp-server ifmib ifalias long command. Use the no form of this command to revert to the
default length.
Syntax Description
This command has no arguments or keywords.
Defaults Global interface persistence is disabled.
The alias name is 64 bytes in length.
Command Modes Global configuration
Command History Release
Release 3.7.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper
task IDs.
Use the snmp-server ifmib ifalias long command to enable the IF-MIB object ifAlias to accept an
interface alias name that is greater than 64 bytes in length. The default length for the alias name is
64 bytes.
Task ID Task ID
snmp
Examples The following example shows how to enable the IF-MIB object ifAlias:
RP/0/RP0/CPU0:Router(config)# snmp-server ifmib ifalias long
RP/0/RP0/CPU0:Router(config)# exit
Uncommitted changes found, commit them before exiting(yes/no/cancel)? [cancel]:yes
RP/0/RP0/CPU0:Router#
OL-17231-01
snmp-server ifmib ifalias long
no snmp-server ifmib ifalias long
Modification
This command was introduced on the Cisco ASR 14000 Series Router.
Operations
read, write
Cisco ASR 14000 Series Router System Management Command Reference
snmp-server ifmib ifalias long
SMR-613