Cisco ASR 14000 Series Management Command Reference page 350

install add
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
install add
To copy the contents of a package installation envelope (PIE) file to a storage device, use the install add
command in EXEC or administration EXEC mode.
Administration EXEC Mode
EXEC Mode
Syntax Description source source-path
tar
file
activate
admin-profile
auto-abort-timer time
Cisco ASR 14000 Series Router System Management Command Reference
SMR-348
install add [source source-path | tar] file [activate [admin-profile] [auto-abort-timer time]
[location node-id]] [asynchronous | synchronous] [parallel-reload] [prompt-level {default
| none}] [if-active] [sdr OWNER]
install add [source source-path | tar] file [activate [auto-abort-timer time] [location node-id]]
[asynchronous | synchronous] [parallel-reload] [prompt-level {default | none}]
Source location of the PIE files to be appended to the PIE filenames.
Location options are as follows:
Indicates that the PIE file is contained in a tar file.
Name and location of the PIE file (composite package) to install. If a
source path location is specified using the source keyword, the file
argument can be either a fully specified PIE file path, or a path to the
PIE file relative to the source path.
Note
If the tar keyword is used, the file argument is a tar file that contains one
or more PIE files, or directories containing PIE files.
(Optional) Activates the package or packages. This option is run only if
the install add operation is successful.
(Optional. Administration EXEC mode only.) Activates the package
only for the admin-plane nodes. Admin-plane nodes provide
system-wide functionality and do not belong to a specific SDR.
Examples of admin-plane nodes are fabric cards and service processor
modules (SPs). The admin-profile keyword is used to update
admin-plane resources without impacting the routing nodes in any SDRs
(Optional) Specifies an abort timer value, time, in minutes, which when
expired loads the last committed loadpath.
Software Package Management Commands on Cisco IOS XR Software
disk0:
•
disk1:
•
compactflash:
•
harddisk:
•
• ftp://username:password@hostname or ip-address/directory-path/
• rcp://username@hostname or ip-address/directory-path/
tftp://hostname or ip-address/directory-path/
•
Up to 32 PIE files can be added to a device in a single install add
operation.
OL-17231-01