Cisco ASR 14000 Series Management Command Reference page 376

install rollback to
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
Use the
point.
Rolling Back the Software Set for a Specific SDR
•
•
Task ID Task ID
pkg-mgmt
Examples
The following example shows how to roll back to a saved installation point:
RP/0/RP0/CPU0:router# admin
RP/0/RP0/CPU0:router(admin)# install rollback to 8
Install operation 10 'install rollback to 8' started by user 'user_b' at 07:49:26
UTC Mon Nov 14 2005.
The install operation will continue asynchronously.
RP/0/RP0/CPU0:router(admin)#Info:
be persistent
Info:
Info:
Info:
Info:
Info:
Info:
The currently active software is the same as the committed software.
Install operation 10 completed successfully at 07:51:24 UTC Mon Nov 14 2005.
Related Commands Command
clear install rollback
oldest
install commit
install label
show install log
show install request
show install rollback
Cisco ASR 14000 Series Router System Management Command Reference
SMR-374
show install rollback
To roll back the software set for a specific SDR from administration EXEC mode, use the install
rollback command with the sdr keyword and sdr-name argument.
To roll back the software set when logged into an SDR, use the install rollback command in EXEC
mode.
Operations
read, write
across system reloads. Use the command 'admin install commit' to make
changes persistent.
Please verify that the system is consistent following the software
change using the following commands:
show system verify
install verify
Description
Deletes saved installation points from the installation buffer.
Makes the current active software set persistent across RP reloads.
Adds a label or description to a state associated with a rollback point.
Displays the entries stored in the logging installation buffer.
Displays the list of incomplete installation manager requests.
Displays the software set associated with a saved installation point.
Software Package Management Commands on Cisco IOS XR Software
command to display the software set associated with a saved installation
The changes made to software configurations will not
OL-17231-01