Cisco ASR 14000 Series Management Command Reference page 30

show mirror
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
disk1:
compactflash:
disk0a:
disk1a:
compactflasha:
Mirroring Rommon Variable
BOOT_DEV_SEQ_CONF = disk0:;disk1:
BOOT_DEV_SEQ_OPER = disk1:
MIRROR_ENABLE = Y
Syncing Files
Number Left:
Current file:
Current state:
Table 6
Table 6
Field
Mirroring Enabled
Configured Primary
Configured Secondary
Current Mirroring State
Current Physical Primary
Current Physical Secondary
Mirroring Logical Device
Physical Device
State
Cisco ASR 14000 Series Router System Management Command Reference
SMR-26
Available
Not Present
Available
Available
Not Present
5735
asr14k-base-3.6.0.10I/schema/l2protocols_srp_action.schema
File is Syncing
describes the significant fields shown in the display.
show mirror Field Descriptions
Enabled Formatted
Formatted
Formatted
Description
Indicates whether mirroring is enabled or disabled.
If mirroring is enabled, the configured primary disk for
mirroring.
If mirroring is enabled, the configured secondary disk for
mirroring.
Current status of mirroring. Possible values are as follows:
Syncing files—Files are being synchronized between the
primary and secondary disks.
Not Configured—Mirroring is not configured.
Mirroring Paused—In this state no mirroring is being done to
the secondary device and the disk redundancy has been
removed. The values of the BOOT_DEV_SEQ_OPER and
MIRROR_ENABLE variables reflect this.
Redundant—The primary and secondary disks are totally in
synchronization. Any read or write failure on the primary
device results in disk redundancy failover such that all
operations are performed on the secondary device.
Current primary disk.
Current secondary disk.
Device name used by the mirroring process to intercept all
application requests to that named device before passing
them through to one of the mirrored physical devices.
Physical disk in router.
Status of the disk. Possible values are as follows:
Available—Disk exists in router and is available.
Not present—Disk does not exist in router. "a" partitions of
disks are only available after the disk has been formatted with
the partition keyword.
Boot Commands on Cisco IOS XR Software
OL-17231-01