Cisco ASR 14000 Series Management Command Reference page 537

Process and Memory Management Commands on Cisco IOS XR Software
C i s c o C o n f i d e n t i a l - B e t a R e v i e w R 3 . 7. 1
process shutdown
The process shutdown command shuts down (terminates) the specified process and copies associated
with the specified process. The process is not restarted, even if considered "mandatory." Use the show
processes command to display a list of executable processes running on the system.
Stopping a process can result in an RP failover, system failure or both. This command is intended for
Caution
use only under the direct supervision of a Cisco Technical Support representative.
process restart
The process restart command restarts a process, such as a process that is not functioning optimally.
process start
The process start command starts a process that is not currently running, such as a process that was
terminated using the process kill command. If multiple copies are on the system, all instances of the
process are started simultaneously.
process blocked
This command is used by Cisco Technical Support engineers to collect debug information about a
process. If the
causes the node to restart.
Task ID Task ID
root-lr
Examples The following example shows how to restart a process. In this example, the IS-IS process is restarted:
RP/0/RP0/CPU0:router# process restart isis
RP/0/RP0/CPU0:router#RP/0/RP0/CPU0:Mar 30 15:24:41 : isis[343]: %ISIS-6-INFO_ST
RTUP_START : Cisco NSF controlled start beginning
RP/0/RP0/CPU0:router#RP/0/RP0/CPU0:Mar 30 15:24:52 : isis[352]: %ISIS-6-INFO_ST
RTUP_FINISH : Cold controlled start completed
The following example shows how to terminate a process. In this example, the IS-IS process is stopped:
RP/0/RP0/CPU0:router# process shutdown isis
RP/0/RP0/CPU0:router#
The following example shows how to start a process. In this example, the IS-IS process is started:
RP/0/RP0/CPU0:router# process start isis
RP/0/RP0/CPU0:router#RP/0/RP0/CPU0:Mar 30 15:27:19 : isis[227]: %ISIS-6-INFO_STA
RTUP_START : Cold controlled start beginning
RP/0/RP0/CPU0:Mar 30 15:27:31 : isis[352]: %ISIS-6-INFO_STARTUP_FINISH : Cold co
ntrolled start completed
OL-17231-01
process mandatory command is set for a process, the process blocked command also
Operations
execute
Cisco ASR 14000 Series Router System Management Command Reference
process
SMR-535